CureZone   Log On   Join
Re: SilverLungs Generator
 
Johny Apple Bomb Views: 3,637
Published: 9 years ago
 
This is a reply to # 2,225,706

Re: SilverLungs Generator


For most internal uses. You don't want to go over 20 ppm as the particles will begin to stick together.

If you don't have a current limiting circuit you probably don't want to go higher than 5 ppm. Current will go up with the conductivity of increasing levels of silver.

Larger electrodes will allow more current without the larger particles. The same amount of current will be spread over a larger area.

Slow stirring keeps the silver from concentrating around the electrodes.
 
Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


 

Donate to CureZone


CureZone Newsletter is distributed in partnership with https://www.netatlantic.com


Contact Us - Advertise - Stats

Copyright 1999 - 2023  curezone.us

11.484 sec, (1)